TV Wall Mounting in Toronto Homes

Toronto · City of Toronto

TV Mounting for Toronto Homes

TV mounting in Toronto runs from lath and plaster in a Riverdale semi to poured concrete in a King West tower, and the wall decides everything. I check what is behind the surface before I drill, then pick anchors and a bracket that suit it.

You choose fixed, tilting or full-motion, I get it level, hide the cable where the construction allows, and clean up. Parking is tight on the older downtown streets, so tell me what is possible and I will plan around it. If a second TV needs hanging, I can do both in one visit.

In an old Toronto semi the natural TV wall is often the party wall you share with next door, and that is double brick, so it takes masonry anchors and a few minutes of hammer drilling your neighbour will hear. I try to keep that to a weekday afternoon. The rest of the house is lath and plaster on studs that ignore the modern sixteen inch rule. Downtown in the King West and CityPlace towers it swings the other way: poured concrete, and a drilling window set by the building.

Get a Free Quote +1 (437) 929-3015

TV Mounting in Toronto

Areas covered

The Annex Cabbagetown Riverdale Leslieville Parkdale Little Italy Trinity Bellwoods Roncesvalles The Beaches Yorkville

Booking

Mon – Sat: 8:00 AM – 8:00 PM
Sunday: By appointment

Full guide

Read everything about tV Mounting

All work in this area

Handyman services in Toronto

Typical Calls

TV Mounting Jobs in Toronto

Full-motion mount on a Riverdale semi's plaster wall

TV on the concrete wall of a King West condo

Bedroom TV mounted in a Parkdale rental apartment

Cables hidden in a Leslieville living room wall

Tilting bracket above a brick chimney breast

Included

What TV Mounting Covers

Stud location confirmed before any drilling
Fixed, tilting or full-motion bracket fitted
Concrete and hollow block anchored correctly
Screens levelled and centred to your seating
Cables concealed in raceway or wall
Soundbar mounted centred under the screen
Existing wall mount removed and holes filled
Devices connected and picture checked

Full tV Mounting guide

How It Runs

From Message to Finished Job

1

Photos and details

Send a photo of the wall and the model of your TV. That tells me the screen size, the VESA pattern and usually the wall construction, which is most of what I need to quote the mount accurately.

2

Wall survey on site

On arrival I scan for studs, pipes and wiring, confirm the framing by probing inside the bracket footprint, and agree the exact height with you before a single hole is drilled. Marking is done with a level, not by eye.

3

Bracket and screen fitted

The wall plate goes up and gets checked for level, the arms are bolted to the back of the television with the correct length hardware, and the screen is lifted on and locked. Then it is levelled again under load.

4

Cables, test, tidy

Cables are routed and hidden by the method you chose, the picture is tested on your inputs, and the mount is exercised through its full movement so nothing snags. Dust and packaging go with me and the floor gets a vacuum.

What Affects the Price in Toronto

Screen size and wall type drive most of it. A mid-size television into wood studs is quick work. The same screen onto concrete, brick or hollow block takes longer and needs specific anchors, and a large panel needs careful handling. Full-motion arms take more time than fixed plates. Cable concealment adds to the job depending on which method you choose, and supplying the bracket yourself or having me bring one changes things too. The price is agreed with you before I drill.

Nothing starts before the price is agreed. Send a photo or two with your request and I can usually quote without a site visit.

Asked in Toronto

Do I need condo approval before you mount a TV in my downtown unit?

Most downtown Toronto buildings do not ask for approval to hang a TV bracket, but many limit drilling to weekday daytime hours and want the service elevator booked if a large box is coming up. Check with your concierge or property manager before you pick a time. I keep the hammer drilling short, vacuum the concrete dust as I go and work inside whatever window the building sets.

Also in Toronto